WMS Brochure 2026 Digital Organized - Flipbook - Page 32
Vitreous Enamelling
昀椀ring, the piece cools slowly to prevent cracking
or distortion.
Among the most distinctive decorative techniques
employed in the manufacture of medals and
insignia is vitreous enamelling. Vitreous enamel
is made from 昀椀nely ground glass mixed with
metallic oxides to produce speci昀椀c colours. The
enamel powder is applied to prepared metal
surfaces, typically base metal, silver, or gold, as a
paste mixed with water or a binding medium. The
metal must be thoroughly cleaned and free from
grease or oxidation to ensure proper adhesion
during 昀椀ring.
Because enamel shrinks slightly as it melts,
multiple applications and 昀椀rings are often needed
to build the desired thickness and level surface.
The 昀椀nal enamelled surface may be pumiced to
produce a smooth, lustrous 昀椀nish that sits 昀氀ush
with surrounding metalwork. This results in a
durable surface resistant to fading, moisture, and
wear, ideal for items intended for long-term use
or ceremonial display.
In many designs, the metal component is 昀椀rst
struck or formed with recessed compartments
intended to hold the enamel. The enamel is then
carefully placed into the recesses using spatulas,
quills, or 昀椀ne brushes, ensuring even distribution
and avoiding trapped air bubbles.
Vitreous enamelling has long been associated
with orders, decorations, regimental badges, and
insignia, where vivid colour, permanence, and
symbolic value are essential to the 昀椀nished piece.
The piece is 昀椀red in a kiln or by hand with a 昀氀ame
at a temperature suf昀椀cient to melt the enamel,
causing it to 昀氀ow and fuse to the metal surface.
During 昀椀ring, the enamel softens into a smooth,
glass-like layer that bonds permanently. After
29