WMS Brochure 2026 Digital Organized - Flipbook - Page 31
Soldering & Assembly
correct alignment, often held in place using small
jigs, binding wire, or purpose-made 昀椀xtures,
and heat is applied using a gas torch. As the
temperature rises, the solder melts and 昀氀ows into
the joint, bonding the parts together as it cools
and solidi昀椀es.
In the manufacture of medals and decorations,
soldering is commonly used to attach suspension
rings, brooch 昀椀ttings, mounting bars and clasps.
It is also employed in the assembly of multi-part
designs, such as badges incorporating separate
crowns, scrolls, or enamelled panels. Each joint
must be strong enough to withstand repeated
handling and wear, particularly in items intended
for ceremonial or uniform use.
After soldering, the assembled piece is usually
subjected to a cleaning process to remove
residual 昀氀ux and surface discolouration caused
by heating. This may involve immersion in a mild
acid solution, followed by rinsing and drying. The
joint is then inspected for strength, alignment and
appearance.
Once individual components have been formed,
struck, and 昀椀nished, the next stage in the
manufacture of medals, badges, and insignia is
soldering and assembly.
Assembly may also include mechanical operations
in addition to soldering. Riveting or pinning
may be used where disassembly is required or
where heat-sensitive materials such as enamel
components are present.
Soldering is the process by which metal
components are permanently joined using a 昀椀ller
metal, known as solder, which melts at a lower
temperature than the parts being joined. The
selected solder must match the base metal in both
colour and mechanical properties, particularly
where the joint may be visible in the 昀椀nal piece.
Before soldering can take place, the surfaces
to be joined must be carefully prepared. This
preparation typically involves cleaning and lightly
abrading the contact areas to remove oxides,
grease, or other contaminants that could interfere
with the 昀氀ow of solder. A chemical compound
known as 昀氀ux is then applied to the joint. The 昀氀ux
prevents oxidation during heating and promotes
the smooth 昀氀ow of molten solder into the joint.
The components are then positioned in their
28