WMS Brochure 2026 Digital Organized - Flipbook - Page 30
Saw Piercing
Maintaining a steady hand and controlled
movement is essential, as any deviation from the
marked line can affect both the appearance and
functionality of the component. For this reason,
saw piercing is typically reserved for work where
precision and adaptability outweigh the need for
speed.
In cases where production numbers are
small or the outline is especially intricate, saw
piercing provides a practical and highly effective
alternative. This method involves cutting the
shape manually using a 昀椀ne metal-cutting blade,
traditionally operated by hand within a jeweller’s
piercing frame. The blank is 昀椀rmly held to a
bench peg, allowing the operator to guide the
saw blade along carefully marked lines, removing
unwanted material with precision and control.
In some instances, the two methods are used
in combination. A clipping tool may 昀椀rst be
employed to produce the primary outline of the
piece, establishing the overall form with ef昀椀ciency
and consistency. Saw piercing can then be applied
to re昀椀ne speci昀椀c areas or introduce internal
features that require a more detailed approach.
Saw piercing offers a high degree of 昀氀exibility,
enabling both complex external pro昀椀les and
detailed internal cut-outs to be produced without
the need for dedicated tooling. This makes
it particularly valuable for prototypes, short
production runs, or designs incorporating 昀椀ne
detail that would be dif昀椀cult, or impractical, to
achieve through clipping alone. The ability to
respond directly to the design also allows for
minor adjustments during the process, ensuring
that the 昀椀nished piece aligns closely with the
intended speci昀椀cation.
Following clipping or piercing, the shaped pieces
typically undergo further 昀椀nishing operations such
as 昀椀ling or buf昀椀ng. These processes remove burrs
and sharp edges, ensuring that the component
is safe to handle and properly prepared for
subsequent stages such as enamelling or assembly.
The process is, however, considerably slower than
press-based operations and relies heavily on the
skill, accuracy, and consistency of the craftsman.
27