WMS Brochure 2026 Digital Organized - Flipbook - Page 26
Blank Preparation
speci昀椀cation of the medal.
The manufacture of a medal begins not with the
striking press, but with the careful preparation
of the blank, the plain metal disc from which the
昀椀nished piece will ultimately emerge. This initial
stage, known as blanking, is fundamental to the
quality, consistency, and ef昀椀ciency of the entire
production process.
One such operation is doming, in which the blank
is slightly curved or dished using a forming die.
This subtle shaping increases the rigidity of the
blank and can improve the 昀氀ow of metal during
striking. Domed blanks are particularly useful
where high relief or sharply de昀椀ned features are
required, as the curvature helps distribute the
striking pressure more evenly across the surface.
Alternatively, or in addition, the blank may be
subjected to edge disruption processes. In this
process, the edge of the blank is compressed
and raised to form a narrow rim around its
circumference. The rim serves several important
purposes: it strengthens the edge of the medal,
helps contain the metal during striking, and
protects the design from wear once the medal is
in use. Edge disruption processes also ensure a
consistent 昀椀nished diameter and provides a clean
boundary for the 昀椀nal impression.
Blanking is carried out using a punch and die
set mounted in a mechanical or hydraulic press.
Sheets or coils of metal, commonly, gilding
metal, cupro-nickel or silver are fed into the
press, where the punch forces the metal through
the die aperture, cutting out a circular disc of
precise diameter. The process must be accurately
controlled to ensure uniformity of size and
thickness, as even slight variations can affect the
clarity of the 昀椀nal strike and the alignment of the
dies.
During the blanking process oils and residues
accumulate on the surface of the metal. These
contaminants can interfere with the striking
process, causing defects in the 昀椀nish or preventing
proper adhesion of plating. The blanks are
therefore thoroughly cleaned, traditionally by
immersion in heated chemical solutions or alkaline
detergents, followed by rinsing and drying. Once
degreased, the blanks may undergo additional
shaping operations depending on the design and
Although unseen in the 昀椀nished piece, these
processes determine the quality of the strike,
the durability of the medal, and the ef昀椀ciency of
production.
23